Jungheinrich EFG 535 Betriebsanleitung Seite 143

Boom
Hydraulic operations
Check attachment is properly secured to the truck and the
1
supporting elements.
Video system
System Components
1 Test the camera, make sure it is secured and clean.
2 Test the monitor, make sure it is secured and clean.
3 Check wiring is secure and check for damage.
Weigher sensors / switches
Electrical System
1 Test weigher system and check for damage.
Weather-proof system
Electrical System
1 Check fuse ratings.
Chassis and superstructure
1 Test the doors and check for damage.
2 Test the windscreen heating and check for damage.
Wiper/washer system
Chassis and superstructure
Check wiper water container for leaks and check volume, top up if
1
necessary.
2 Test windscreen wipers and check for damage, replace if necessary.
Fork positioner
Hydraulic operations
Check attachment is properly secured to the truck and the
1
supporting elements.
2 Check cylinder piston rods and bushings.
Attachment: check bearing points, guides and stops for wear and
3
damage, grease and clean these components.
4 Test the fork positioner and check for damage.
5 Test attachment, check settings and check for damage.
142
W A B C
t
W A B C
t
t
t
W A B C
t
W A B C
t
W A B C
t
t
W A B C
t
t
W A B C
t
t
t
t
t