Jungheinrich EFG 535 Betriebsanleitung Seite 120

Info messages
Display Meaning
– No direction selected when the truck is powered up, no wheel
INFO 02
– Travel direction changed to neutral setting during operation,
(optional setting for travel cutout input)
INFO 05
Lift cutout active / independent of other conditions.
(optional setting for travel cutout input)
INFO 16
Travel cutout active / independent of other conditions.
Accelerator pedal zero position
– Message can be adjusted to suit preference – either the zero
INFO 35
Hydraulics zero position
INFO 36
– Message can be adjusted to suit preference - message
Overtemperature
INFO 40
– Traction or lift controller above 83° C.
– Traction or lift controller above 145° C.
Travel with handbrake on
INFO 90
– Accelerator pedal applied while the handbrake switch is set to
Hydraulics zero position on power up
INFO 96
– A hydraulic function applied during power up.
– The hydraulic function applied will not be performed.
position displayed.
wheel position display alternates between forward and
reverse.
position is only checked after power up or after every transition
of the seat switch from the open to closed position.
displayed or not.
parking position.
119