Checking Electrical Fuses - Jungheinrich EFG 535 Betriebsanleitung

6.12 Checking electrical fuses

WARNING!
Electric currents can cause accidents
Make sure the electrical system is voltage-free before starting work on it. Before
starting maintenance on the electrical system:
Park the truck securely ((see "Parking the truck securely" on page 73)).
Press the Emergency Disconnect.
Disconnect the battery.
Remove any rings or metal bracelets etc. before working on electrical components.
CAUTION!
The use of incorrect fuses can cause fire and damage components
The use of incorrect fuses can damage the electrical system and result in fire. The
safety and functionality of the truck cannot be ensured.
Use only fuses with the prescribed rated current, (see "Fuse ratings" on page 160).
Checking electrical fuses
Requirements
– Prepare the truck for maintenance and repairs ((see "Preparing the truck for
maintenance and repairs" on page 149)).
Procedure
• Open the rear cover of the truck, (see "Opening the rear panel" on page 149).
• Unscrew the electrical system cap.
• Check condition and rating of the fuses in accordance with the table.
• Replace any damaged fuses in accordance with the table.
• Close the electrical system cap.
• Close the rear cover of the truck.
The electrical fuses are now checked.
159