Positioning the integrated sideshift (option)
Requirements
– Truck ready for operation, (see "Preparing the
truck for operation" on page 71)
Procedure
• Press the button (114) to the left to move the
load handler to the left (from the driver's
viewpoint).
• Press the button (114) to the right to move the
load handler to the right (from the driver's
viewpoint).
The sideshifter is now positioned.
Z
When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.
Positioning the forks with an integrated fork
adjuster (option)
CAUTION!
Do not use the fork adjuster to clamp
loads.
Requirements
– Truck prepared for operation, (see "Preparing
the truck for operation" on page 71).
Procedure
• Press the button (115) and at the same time press the button (72), the forks will
spread apart.
• Pull the button (115) and at the same time press the button (72), the forks will move
together.
The forks are now positioned.
88
114
115
61
72