Steering - Jungheinrich EFG 535 Betriebsanleitung

Dual pedal (optional equipment)
Requirements
– Truck prepared for operation, (see "Preparing
the truck for operation" on page 71).
Procedure
Z
For trucks with a dual pedal the travel direction
is selected via the accelerator pedals (68;67).
When the driver leaves the truck, the truck is
automatically set to "Neutral".
• Release the parking brake (58).
• Raise the fork carriage approx. 200 mm.
• Tilt the mast back.
•
• Apply the accelerator pedal (68) to travel
forward. The travel speed is governed by the
accelerator (68).
• Apply the accelerator pedal (67) to reverse.
The travel speed is governed by the
accelerator (67).
The truck travels in the direction selected.
4.7

Steering

Requirements
– Truck ready for operation, (see "Preparing the truck for operation" on page 71)
Procedure
• To negotiate a right-hand bend:
• Turn the steering wheel clockwise to match the desired steering radius.
• To negotiate a left-hand bend:
• Turn the steering wheel anti-clockwise to match the desired steering radius.
76
67
63
68
58