Jungheinrich EFG 535 Betriebsanleitung Seite 123

7.2.2 Operating the truck without its own drive system
WARNING!
Uncontrolled truck movement
The truck can roll away if the spring pressure brake is released and if there is
insufficient protection.
Release the spring pressure brake to move the truck without power.
Suitable measures must first be taken to prevent the truck from rolling away.
Releasing the parking brake
Requirements
– Turn the Emergency Disconnect switch and
key switch off.
– Disconnect the battery.
– Prevent the truck from rolling away.
– Remove the floor plate by undoing the floor
plate mounting screws.
Procedure
• Loosen the screw (144).
• Unlock and remove the magnetic coil (145).
• Insert the screw (144); this will activate the
valve mechanically.
• Rotate the steering wheel approx. 2 turns.
Z
The accumulator is pumped up and the brake released.
• Tow the truck to its destination using the pull rod.
The truck has now reached its destination.
Applying the parking brake
Procedure
• Loosen the screw (144).
• Place the magnetic coil (145) on the valve and lock it.
• Insert the screw (144). The drive wheels are blocked / decelerated by the brake.
• Fit the floor plate.
Park the truck securely.
122
144
145