Jungheinrich EFG 535 Betriebsanleitung Seite 96

4.14.2 Solo Pilot with control of ZH1 and ZH2 hydraulic ports
Z
Depending on the attachments used the lever
/ button (110, 112, 113) is assigned the
function of the attachment. Levers that are
not required are void. For connections (see
"Fitting additional attachments" on page 98).
Procedure
• Operating the hydraulic port ZH1:
Move the lever (112) in direction V or R.
• Operating the hydraulic port ZH2:
Press the toggle switch (113) and at the same
time move the lever (110) in the V or R
direction.
The attachment's function is performed.
4.14.3 Solo Pilot with control of ZH1, ZH2 and ZH3 hydraulic ports
Z
Depending on the attachments used the
levers / buttons (110, 112, 113, 116) are
assigned the respective functions. Levers that
are not required are void. For connections
(see "Fitting additional attachments" on
page 98).
Procedure
• Operating the hydraulic port ZH1:
Move the lever (112) in direction V or R.
• Operating the hydraulic port ZH2:
Move the lever (116) in direction V or R.
• Operating the hydraulic port ZH3:
Press the toggle switch (113) and at the same
time move the lever (110) in the V or R direction.
The attachment's function is performed.
112
110
V
R
113
110
112
V
R
113
116
95