Synchronising the alignment of the fork tines
with an integrated fork adjuster (optional
equipment)
Requirements
– Truck prepared for operation, (see "Preparing
the truck for operation" on page 71).
– The fork tines are no longer aligned.
Procedure
• Press the button (115) and at the same time
press the button (72), the forks will spread
apart.
• Pull the button (115) and at the same time press the button (72), the forks will move
together.
The fork tines are now synchronised.
Z
When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.
115
72
89