IFM Electronic Ecomot 100 Handbuch Seite 35

CAN CR3101
MEM
PCMCIA card (PC card)
Before using the PCMCIA card fit it with a pull-out aid (e.g. self-adhesive strip).
With this pull-out aid the card can be removed easily.
If the memory card is inserted incorrectly, insertion of the card into the device-in-
ternal plug-in strip is mechanically prevented.
pull-out aid PCMCIA slot
Configuration and structuring of the card
The card is structured with the software tool "CANmem Configurator". How this
is done is described in the programming manual.
Storage functions
Data records (struct, record) consisting of 1-8 components (process data, vari-
ables) of different data types are stored.
The following data types are available:
BYTE (u8), WORD (u16), INT (s16), DWORD (u32), DINT (s32), REAL (float 32).
These data records are stored in a file or read from a file according to a selectable
operating mode. Up to 8 files can be created. One data record each is addressed.
The components of this current data record can be accessed via the object direc-
tory. The current data record is selected via an address.
In the device every data record is assigned an entry for date/time and an entry
with the modification status of the individual components.
Process data can be stored via PDOs or SDO. Data records are exclusively read via
SDO.
The addressed (current) data record is in the object directory (Idx 5000 + offset).
It is accessed via SDO or PDO.
35