Function And Features - IFM Electronic Ecomot 100 Handbuch

1. Function and features

Using CANmem process data of a running application can be stored on SD,
MMC or PCMCIA memory cards. Preset values already stored (plant parameters,
preset value tables, etc.) can be loaded to the controller.
The device can be directly used in the machine or the mobile equipment. The
CAN connection and the 10...30 V DC voltage supply are ensured via a 5-pole
M12 round plug.
Applications
Parameter setting of mobile machines and equipment
Buffer storage of remote diagnostic data
Storage of alarm and error messages (black box function)
Reading operational data from the machine in operation
Writing data blocks to and reading them from the RAM memory
USB
transfer preset values
evaluate process data
load the operating system
Three software tools are available for CANmem:
• CANmem Configurator (configuration and structuring of the memory card),
• CANmem Downloader (updating and loading of operating systems),
• CANmem Reader (reading and conversion of the stored data).
These tools are described in the respective programming manual. A summary of
the manuals in PDF format can be downloaded from the Internet at "www.ifm-
electronic.com".
www.ifm-electronic.com
or notebook
with SD/MMC or PCMCIA slot
SD/MMC card
or PCMCIA card
Data sheet direct
transfer preset values
evaluate process data
CAN bus
sensors/actuators
CR3101 Additional Data.
CAN CR3101
MEM
controller
29