CAN
CR3101
MEM
11. Maintenance, repair and disposal
As no components to be maintained by the user are contained in the data mem-
ory, the housing must not be opened. The data memory can only be repaired by
the manufacturer.
The device must be disposed of in accordance with the national environmental
regulations.
12. Declaration of conformity
The CE mark is applied on the basis of the EMC Directive 89/336/EEC, the CE
Marking Directive 93/68/EEC and the Law on Electromagnetic Compatibility of
Equipment dated 18 September 1998.
Standards used:
Generic standards: EN 61000-6-4: 2001
Noise emission:
Noise immunity:
This is a class A installation. It can cause radio interference in domestic
areas. In this case the operator is requested to take appropriate measures at
his own expense.
50
EN 61000-6-1: 2001
measurement of the noise field strength to EN 55022 class A
to fast interference (burst) to EN 61000-4-4
discharge of static electricity to EN 61000-4-2
induced interference to EN 61000-4-6
electromagnetic fields to EN 61000-4-3