Nivotester FTR525
7.5
Configuration management
Following commissioning of the microwave barrier, it is possible to save the current device
configuration of the FTR525 or restore an existing device configuration, using the following
functions.
7.5.1
Save user settings
System
Management
→
3000
3100
This function can be used to save up to three separate sets of user settings.
Options: "User settings 1" to "User settings 3"
We recommend that users also separately make a note of their device settings (for example,
in order to restore them following a technical failure). The "User-specific settings" form
from the Technical Information (→ 42) can be used for this.
7.5.2
Device reset
System
Management
→
3000
3100
This function can be used to restore the saved user settings or perform a factory reset.
Options: "Factory reset", "User reset 1" to "User reset 3"
• An overview of all factory settings that will be loaded following a factory reset can be found
in the Appendix (→ 73).
• Saved user settings are not deleted following a factory reset.
7.6
Protecting settings from unauthorized access
The following options are available to protect the configuration of the measuring device from
unintentional modification after commissioning:
• Write protection via unlock parameter
• Write protection via key lock
For detailed information regarding protecting the settings from unauthorized access:
See the Operating Instructions for the device.
Endress+Hauser
Device management
→
3110
Device management
→
3110
Save user settings
→
3112
Device reset
→
3113
Commissioning
71