Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Nivotester FTR525
2
Basic safety instructions
2.1
Requirements for personnel
The personnel for installation, commissioning, diagnostics and servicing must meet the
following requirements:
• T rained, qualified specialists: Must be qualified for this specific function and task
• Authorized by the plant owner/operator
• Familiar with national regulations
• Before starting work: Read and understand the instructions in the manual and supplementary
documentation as well as the certificates (depending on the application)
‣ F ollow the instructions and relevant guidelines
Operating personnel must meet the following requirements:
• Instructed and authorized according to the requirements of the task by the facility' s
owner/operator
• Follow the instructions in this manual
2.2
Designated use
The process transmitter FTR525 provieds the power supply for the microwave barrier
Soliwave. It records simultaneously the measurements of the point level detection and
optionally of the bulk flow monitoring. The devices FQR57 and FDR57 are operated and
parameterised by the FTR525.
• The device is an associated apparatus and must not be installed and operated in a hazardous
area.
• T he manufacturer is not liable for damage caused by improper or non-designated use.
Conversion work or changes must not be carried out on the device.
• The device is designed for use in industrial environments and may only be operated when
installed.
• The device can and may only be repaired by the manufacturer.
2.3
Occupational safety
When working on and with the device:
• Wear the required personal protective equipment in accordance with national regulations.
Endress+Hauser
Basic safety instructions
43
Werbung
Kapitel
Inhaltsverzeichnis
