Operation and commissioning
Item No.
Function
3
Display unit (°C, °F)
4
Measured value display
5
Channel display C1 or C2, P1, S1 or P2, S2, RJ
6
Display the ' c onfiguration locked' symbol when configuration is locked via the hardware.
7
Warning or error message
Warning: warning code and measured value alternate
Error: error code and "- - - -" (no measured value)
Detailed instructions are provided in the Operating Instructions.
5.3
Configuration of the head transmitter and PA functions
®
PROFIBUS
PA functions and device-specific parameters are configured via fieldbus
communication. The following configuration systems are available for this purpose:
• Endress+Hauser FieldCare (DTM)
• SIMATIC PDM (EDD)
A detailed step-by-step description of the procedure for commissioning the fieldbus
functions, together with information on configuring device-specific parameters, is
given in the Operating Instructions.
40
TMT84
Endress+Hauser