Disaster Alert; Initializing Disaster Alert Call; Exiting Emergency Operations - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

3.6.13 Disaster Alert

Disaster Alert call is a broadcast emergency call initiated by the radio, with emergency pre-emptive priority that
everyone in a broadcast area can hear. This feature is specifically designed for catastrophic situations, such as
earthquakes, and has the highest priority over other calls. All radios under Disaster Alert display emergency
notification on their screens. The alert message, its duration and destination talkgroup can be configured in
the codeplug.
In order to initiate Disaster Alert, switch the radio to Disaster Alert mode and press PTT button. When the call ends,
the radio will exit the Disaster Alert state.
During Disaster Alert, other functionality is impacted:
• When Disaster Alert begins, any other ongoing services are terminated.
• No other services can interrupt this type of call.
• Hot Mic functionality cannot be used.
• Speech can only be in Clear mode, even if any of the encryption services are enabled. The only exception is
E2E Encryption.
Not all infrastructures support this feature. Please consult with your service provider before enabling
this feature.

3.6.14 Initializing Disaster Alert Call

Procedure Steps
1 From the home screen, press the MENU key.
Select Services → Disaster Alert.
2
Step result: Your radio enters Disaster Alert Mode and it displays Disaster Alert icon.
3 To start the call press PTT.
Step result: Your radio displays Disaster AlertIn Use.

3.6.15 Exiting Emergency Operations

Prerequisites:
Make sure that your radio is engaged in Emergency Operations.
-
3.6.13 Disaster Alert
3-21