Setting Language; Data Setup; Setting Data Function; Audio - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Feature User Guide

5.7.3.1 Setting Language

Procedure Steps
From the home screen, press the MENU key.
1
2 Select Setup → Language.
Select desired language.
3

5.7.4 Data Setup

This menu item allows you to set up your radio to transmit and receive data from the external device.
To connect your radio accessory connector to the external device, use the PMKN4104 cable. The external device
must run an application complying with the TETRA standards.
• Data services are available only in TMO Mode.
• Data services are blocked in TXI Mode.

5.7.4.1 Setting Data Function

Procedure Steps
1 From the home screen, press the MENU key.
2 Select Setup → Data Setup.
3 Select one of the following:
• Voice Only — Your radio receives and transmits voice calls only.
• Data Only — Your radio acts as a modem. It rejects incoming and outgoing voice calls (except for
Emergency Calls), status and text messages.
• Voice & Data — Your radio acts as a modem but voice calls have priority over data calls and can
interrupt them.

5.7.5 Audio

This menu item allows you to adjust your radio audio settings.
5-30 -