Selecting Network Operation Mode; Location - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Procedure Steps
From the home screen, press the MENU key.
1
2 Select Networks → Networks Sel and choose one of the following option:
• Migrate to... — Selects the required network form the list. To view the network ID press MENU
key then press Select.
• Auto — Your radio automatically attaches to the predefined network.

5.14.6 Selecting Network Operation Mode

Procedure Steps
1 From the home screen, press the MENU key.
2 Select Networks.
3 Select one of the following:
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• Repeater Mode — Switches to the Repeater Mode.
• Gateway Mode — Switches to Gateway Mode.
• TXI Mode — Select Activate to stop sending any radio transmission.
If the radio is in TXI Mode, it is not possible to switch from Direct Mode to Trunked Mode or
Repeater Mode, or Gateway Mode.
Networks
Entering TMO / DMO Mode

5.15 Location

See the GPS Location Service for more information.
-
5.14.6 Selecting Network Operation Mode
5-65