Setting Periodic Alert; D-Ptt Tones; Setting D-Ptt Tones; Display - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Feature User Guide

5.7.6.10 Setting Periodic Alert

Procedure Steps
From the home screen, press the MENU key.
1
2 Select Setup → Tones → Periodic Alert.
Select one of the following:
3
• Alert — Activates/deactivates periodic tone.
• Period — Indicates the time between each periodic tone.

5.7.6.11 D-PTT Tones

This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in idle or the
Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, the user can press and hold the PTT button once again to get the permission to talk.
Otherwise, if the user presses the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent keeping the PTT button pressed, it results in permission to talk. The D-PTT tone is
not audible on a sending radio.
This feature needs to be enabled by your service provider.

5.7.6.12 Setting D-PTT Tones

Procedure Steps
1 From the home screen, press the MENU key.
2 Select Setup → Tones → D-PTT Tones.
Select one of the following:
3
• D-PTT Mode — Activates/deactivates D-PTT tone.
• Tone Style— Indicates how many times the D-PTT tone is played.

5.7.7 Display

This menu item allows you to adjust your radio display settings.
5-34 -