Making A Private Call; Private Call With Presence Check - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Feature User Guide
To answer a Private Call, use one of the following methods:
• Press the PTT button.
• Take the Fist Microphone or Telephone Style Handset off hook. If the Handset is off hook, the radio's
external speaker mutes and the Handset's internal speaker activates.
• Press the SEND key on the control head. Audio is routed to audio input devices in the following order,
depending on their availability:
1.
2.
3.

3.4.6 Making a Private Call

Procedure Steps
From the home screen, enter the number.
1
2 If Private is not the first type of call presented, press Ctype repeatedly to select it.
When you are in the following mode:
3
a. TMO — For a simplex call, press and release the PTT button. You hear a ringing tone. Otherwise, press
and hold the PTT button. Wait for the talk permit tone before talking, and release the PTT button to listen.
For a duplex call, press and release SEND key. You hear a ringing tone.
b. DMO — Only simplex call is available. Press and hold the PTT button. Wait for the talk permit tone
before talking, and release the PTT button to listen.
4 To end the call, press the END key.
If you are using the fist microphone or the telephone style handset, replace it firmly on it's clip or holder
when done.

3.4.7 Private Call With Presence Check

This feature allows you to see if the calling party is available in DMO. When this feature is enabled, you can
only initiate a Private Call if the called radio is present on the same channel and responds with a presence check
acknowledgement.
Otherwise your radio displays Party Not Available.
3-12
A visor microphone.
A microphone of the device that is off hook.
A microphone that was last in use (if two devices are off hook).
-