Making A Phone Or Pabx Call; Phone/Pabx Speed Dial; Using Phone/Pabx Speed Dial; Ms-Isdn - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

6.5.1 Making a Phone or PABX Call

Procedure Steps
1 From the home screen, enter the number.
2 If Phone or PABX are not the first type of call presented, press Ctype repeatedly to select it.
3 Press SEND key.

6.6 Phone/PABX Speed Dial

This feature allows you to dial Phone/PABX by a shortened number of up to three digits instead of the full number.
The Phone/PABX Speed # number is assigned when the dialed number is added in the contact list.
This feature is available only in TMO Mode.

6.6.1 Using Phone/PABX Speed Dial

Procedure Steps
1 From the home screen, enter the predefined Phone/PABX speed dial number and # key.
Press SEND key.
2

6.7 MS-ISDN

This feature adds to the radio ISDN number. You can choose between MS-ISDN and ISSI to address the call, send the
message or pre-defined templates. It works for both simplex and duplex calls, based on the assigned ISDN number.
-
6.5.1 Making a Phone or PABX Call
6-5