Entering Gateway Mode; Standby Mode; Forwarding A Group Call; Figure 3-4 Gateway Mode Operation - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Feature User Guide

Figure 3-4 Gateway Mode Operation

This is a selling feature.

3.8.1 Entering Gateway Mode

Procedure Steps
1 From the home screen, press Optns.
2 Select Gateway Mode.
When the Gateway Mode is enabled, you cannot make any call.

3.8.2 Standby Mode

Your radio enters Standby mode if there is another Gateway on the same DMO frequency. Gateway icon flashes and
no transmission is forwarded through the gateway. To exit Standby Mode you can:
• Choose another DMO talkgroup
• Wait untill the other gateway is out of coverage and is no longer present on that DMO talkgroup

3.8.3 Forwarding a Group Call

Your radio shows the source and destination talkgroup of the Group call.
3-24 -