Activating Talkgroup Scanning - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Procedure Steps
Press and hold the One-Touch button.
1
2 Your radio switches the talkgroup for a predefined amount of time.
To start a group call press PTT.
Your service provider can assign a function to the second press of the One-Touch button to:
• Return to original talkgroup
• Restart the predefined time
• No action
When the group call ends, your radio switches to the original talkgroup after the predefined time.
3

2.12 Activating Talkgroup Scanning

When and where to use:
If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure Steps
1 From the home screen, press the MENU key.
2 Select Group Setup → Scan → Scanning.
3 Select Select List and then a list name.
Step result: Your radio displays list name Selected.
4 Select Scanning → On.
Result:
Your radio is scanning on the predefined scan list.
-
2.12 Activating Talkgroup Scanning
2-19