Viewing Your Position; Viewing Testpage; Packet Data - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Feature User Guide
GPS Location Service

5.15.1 Viewing Your Position

Procedure Steps
1 From the home screen, press the MENU key.
Select Location → Position.
2
3 Scroll to view the results about the last time your location was calculated.
To refresh your position:

5.15.2 Viewing Testpage

Procedure Steps
1 From the home screen, press the MENU key.
2 Select Location → Testpage.
3 Select one of the following:
• Position – displays detailed information on radio's current position: time, N (latitude), E (longitude),
H (height), Sats Used (a number of tracked satellites), B (bearing), HS (horizontal speed), LC (level
of confidence).
• Power – displays detailed information on a particular satellite: PRN code, Status, Mode, C/N
(carrier-to-noise ratio).
• Version – displays detailed information on GPS version: SW (software version), HW (hardware
version), ASIC (application-specific integrated circuit), RC (release code).

5.16 Packet Data

The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet Protocol (IP).
5-66
• Select Position — the radio refreshes its position automatically
• Press Refresh
-