Setting Scan Lists - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Feature User Guide
Procedure Steps
From the home screen, press the MENU key.
1
2 Select Group Setup → Scan → Active List.
If Scanning is Off is displayed, go to Group Setup → Scan → Scanning → On to enable scanning.
Select View and highlight the required talkgroup.
3
4 Press MENU.
5 Select one of the following:
• Delete — Erases this group from the active scan list.
• Priority and select new priority to Low, Medium or High.

5.8.1.3 Setting Scan Lists

When and where to use:
If you want to set up any scan list.
5-50 -