Conventional Functions; Repeater/Direct; Monitor; User-Selectable Private Line (Pl) - Motorola MCS 2000 II Bedienungsanleitung

model III
FAILSOFT
SOUTH DIVISION
and the current active display.

Conventional Functions

Before transmitting, always make sure that the
selected mode is free (Orange LED not on).

Repeater/Direct

Select the menu REPEAT/DIRECT as previously
described or press a preprogrammed button. The cur-
rent mode (direct or repeater) will be displayed. Use
the mode selector (D) to toggle the mode. Press the
select button (13) to select the displayed mode of
operation.

Monitor

Press the monitor button to toggle monitor on or off.
Press and hold the monitor button to enter squelch
configuration. Using the mode selector (D), the
squelch level of the radio may be fine-tuned. Press the
select key when the desired level is attained.
MCS 2000 Models II & III
English
model II
FAILSOFT

User-Selectable Private Line (PL)

User Selectable Private Line (PL) allows the radio user
to select a PL code from a pre-programmed list of
codes. Press the Multiple Private Line (MPL) button (if
programmed) to view the current PL or press and hold
the MPL button to enter MPL configuration. Use the
mode selector to change the PL code and press the
select key when the desired PL is displayed.
Stat Alert (MDC-1200/Star Signalling)
Features

PTT ID and Emergency

Each radio can be programmed to send a unique dig-
ital identification code at the beginning of each trans-
mission, at the end, or both. When the PTT-ID is
programmed to come before voice transmission, you
will hear a tone until the ID transmission is complete.
This ID may be combined with an emergency alarm
that is activated by an emergency button on the radio.
The dispatcher can quickly identify the radio user in
an emergency situation.
Emergency Operation
Emergency is operated as previously described.
68P81083C10-C
page 13