Creating A Contact - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Table 5-4 Contact Types (cont'd.)
Contact Icon
• # (number) — each contacts entry must contain a number.
• Speed # — accept the default Speed Dial number or change it.

5.4.1 Creating a Contact

Procedure Steps
1 From the home screen, select Contcs.
2 Select [New Contact].
3 Highlight Name and press Change. Enter the name of your contact and press Ok.
4 Highlight Type and press Change. Select the required type of your contact.
You can use the left and right NAVIGATION keys to select the type of your contact from the Contact
Details screen.
5 Highlight # (number) and press Change. Enter the number of your contact and press Ok.
6 If needed, highlight Speed # and press Change. Enter the speed dial number (1– 1000) of your contact and
press Ok.
If the entered number exist, the radio displays Overwrite? message. Press Yes to confirm, or No to enter
the speed dial number again.
7 Press Done.
Result:
You have create a contact with one number. To add additional number repeat steps 4–6.
-
Description
Other
Pickers
Indicate more than one number in a contact.
5.4.1 Creating a Contact
5-17