Making A Private Call; Radio Messaging System (Rms) - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Feature User Guide
MS-ISDN
Emergency Individual Calls (Private or MS-ISDN)

6.1.1 Making a Private Call

Procedure Steps
1 From the home screen, enter the number.
If Private is not the first type of call presented, press Ctype repeatedly to select it.
2
3 When you are in the following mode:
a. TMO — For a simplex call, press and release the PTT button. You hear a ringing tone. Otherwise, press
and hold the PTT button. Wait for the talk permit tone before talking, and release the PTT button to listen.
For a duplex call, press and release SEND key. You hear a ringing tone.
b. DMO — Only simplex call is available. Press and hold the PTT button. Wait for the talk permit tone
before talking, and release the PTT button to listen.
To end the call, press the END key.
4
If you are using the fist microphone or the telephone style handset, replace it firmly on it's clip or holder
when done.

6.2 Radio Messaging System (RMS)

The Radio Messaging System (RMS) feature enables radio to receive and send RMS messages through the TETRA
network using the Short Data Service.
There are two types of RMS messages:
• RMS Status – a predefined code that is sent bidirectionally between the radio and the service provider. The
radio can have up to ten statuses that are assigned to numeric keys from 0 to 9. The latest received or sent
RMS status is kept on the home screen until the next power cycle. A received RMS status is displayed
in blue color font on the home screen.
RMS Free Text – a unidirectional message containing free text that is sent to the radio by the service
•
provider. Since this type of message is longer, the radio displays only its beginning on the home screen and
to read its remaining part, you need to go to Menu → Messages → RMS Box. The latest RMS free text is
kept on the home screen until the next power cycle.
RMS free text messages and incoming and outgoing RMS statuses (with the exception of RMS statuses sent) are
stored in the RMS Box. Its capacity is maximum ten entries for incoming and outgoing RMS messages. If the RMS
Box is full, any new incoming or outgoing RMS message overwrites the oldest message (received or sent).
The radio receives and sends RMS messages only from and to the numbers predefined by your service provider.
6-2 -