Viewing A Wap Message; Call-Out; Types Of Call-Out Alerts; Figure 6-1 Call-Out Message - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Feature User Guide

6.13.17.2 Viewing a WAP Message

Procedure Steps
1 From the home screen, press the MENU key.
Select Messages → WAP Box.
2
3 Select the required message.
Select Go to to view the message in the browser.
4

6.14 Call-Out

This feature allows you to receive Call-Out alerts. On receiving the Call-Out messages, the radio interrupts current
services and attends to the Call-Out alert without any further delay. After call-out alert has been cleared, the radio
exits Call-Out mode and reverts to normal mode. During Call-Out mode you are only able to receive Emergency
Calls.
To read an entire Call-Out message, scroll down the screen by pressing the down NAVIGATION key. The
length of the message is indicated by the vertical red bar on the left of the screen.

Figure 6-1 Call-Out Message

CO Box

6.14.1 Types of Call-Out Alerts

There are four types of the Call-Out alerts:
• Normal Call-Out – an alert message that is sent by a dispatcher either to a single radio or to a group of radios.
• Storm Plan – an alert message that is sent by a dispatcher to a group of radios. To raise its reliability, it
is sent several times. You are not able to respond to the Call-Out alert and any key press takes you to
the information phase.
6-22 -