Appendix C Troubleshooting - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Appendix C: Troubleshooting
Your radio displays the following messages:
Table C-1 Displayed Messages
Message
...-Received
Attachment Failed
Authenticate Failure
Call Cancelled
Call Ended
Call Forwarding
Call Modified
Call Preempted
Decryption Failed:
Emergency In Use
Wait For Mic
Emgcy Mic Ended
Emergency Mic On
Empty Entry
Faulty Unit
Error
Gateway available
Gateway not available
This group already exists
Individual Calls Only
Insufficient visible data
Insufficient visible satellites
-
Message Description
Call received but not answered, or rejected.
Your radio could not perform talkgroup attachment. It keeps on
trying. If it does not succeed, try another talkgroup.
Your radio could not register on an authenticated system (for
example, the Authentication Key is incorrect, or authentication is
disabled).
You have canceled the call.
• Faulty channel. Please try later.
• You have ended the call.
The radio you are trying to call is not available and the call is being
forwarded to another radio.
The call you are participating in has been modified.
Channel being used for priority.
An error occurred while decrypting a message or call.
The Hot Microphone feature is active, but the channel transmit grant
has been given to another Emergency call on the same talkgroup.
Your radio microphone is not active during this time, but it
automatically tries to regain talk permit after a predetermined time.
The Hot Microphone timer automatically expired, or you pressed
the PTT button to cancel the Hot Microphone feature.
The Hot Microphone feature is active, and your radio is
automatically transmitting hands free emergency audio.
The speed number you dialed does not exist, or the number exists
but the group is non-selectable.
Self-test failed. An operational fault has been detected with your
radio. Record the error number. Turn your radio off and contact
service.
Your radio has connected to a gateway.
Your radio cannot connect to a gateway, or connection has been lost.
The group you are attempting to add exists in the My Groups folder.
You can make only individual (private) calls.
Your radio is in the process of determining your location. This
process may take several minutes to complete.
Your radio is in the process of determining your location. This
process may take several minutes to complete.
C-1