Volume Cntrl (Control) - Motorola MTM800 FuG ET Ausführliche Bedienungsanleitung

Procedure Steps
From the home screen, press the MENU key.
1
2 Select Setup → Active Accessory Type.
Select one of the following:
3
• Control Head Accry — Higher priority is given to the microphone connected to the control head.
• Transceiver Accry — Higher priority is given to the microphone connected to the transceiver.
• Control Head Accry — Higher priority is given to the microphone connected to the control head.
Applicable to RECH.
• Transceiver Accry — Higher priority is given to the microphone connected to the transceiver.
Applicable to RECH.
• Front Accry — Higher priority is given to the microphone connected to the front accessory connector.
Applicable to TSCH.
• Rear Accry — Higher priority is given to the microphone connected to the rear accessory connector.
Applicable to TSCH.
In case the PTT on any connected accessory is pressed, the highest priority is assigned to that accessory.

5.7.10 Volume Cntrl (Control)

This menu item allows you to determine which audio output device, speaker or earpiece, is being adjusted when
you turn the ROTARY KNOB.
-
5.7.10 Volume Cntrl (Control)
5-41