Private Call; Receiving A Private Call; Sending A Private Call (Trunking Only) - Motorola MCS 2000 II Bedienungsanleitung

Private Call

Receiving a Private Call

When your radio receives a private call, the incoming
private call tone sounds and the display alternates
between
CALL RECEIVED
ID: 2000
and the home display. Line two in the model III display
indicates the ID of the calling party, for model II press
the call button (12) to view it.
The green indicator (B) and the call received icon
flash.
If the PTT (F) is pressed within 20 seconds, the call is
answered and a private conversation can go ahead.
Note: If the call button (12) is not pressed, the
call will be initiated as a talkgroup call.
Press the HOME button (3) (or the menu button (9)
twice) or the call button (12) when the conversation is
over.
MCS 2000 Models II & III
English
CALL RECEIVED

Sending a Private Call (trunking only)

Private calls can be selected either from a list or
directly via the keypad (model III or model II with
optional keypad microphone).
Note: If your radio has been so programmed, you can
press the call button for quick access to the Private
Call function. Using the mode selector (D), you can
scroll between last received ID, Private Call lists and
your own radio ID.
Press the call button (12) or select CALL through the
menus.
The display shows the last ID transmitted or received.
List Selection:
Transmit to the displayed ID by pressing the PTT (F) or
choose another ID from the list by using the mode
selector (D).
To view the radio's own ID, use the mode selector (D)
until the display shows "MY ID:" followed by the
radio's ID, e.g.:
model III
MY RADIO USER
ID: 741317
model II
MY ID: 741317
68P81083C10-C
page 9