ruegg SMART-LINE Bedienungsanleitung Seite 84

SMART-LINE
ECO-LINE
83
Instruction manual
The second feeding of wood should be done approx.
45 minutes after the first feeding. More wood feedings
are mostly not required. If you would like to continue
operation of the system, you must extent the feeding
intervals (every hour) and reduce the feeding amount
(by 0.5 - 1 kg).
If dimensioning requirements for outside air and chim-
ney cross sections given by the manufacturer are not
complied with or are modified subsequently for aes-
thetic, architectural or other reasons, the guarantee
obligation of the manufacturer will no longer apply.
If structural modifications are made to the appliance,
the guarantee obligation of the manufacturer will no
longer apply!
No combustible objects may be placed within the
radiation area of the fireplace insert up to a distance
of 80 cm measured from the front edge of the furnace
opening.
The floor / the fireplace bench in front of the fire insert
must consist of non-combustible material. Minimum
dimensions of this non-combustible surface: 40cm
Objects made of combustible materials may not be
mounted to the fireplace installation up to a distance
of 5 cm.