Storing Individual Values (Func-Stor) - WIKA CPH62I0 Betriebsanleitung

6. Commissioning, operation

6.5.1 Storing individual values (Func-Stor)

Each time the [STORE/QUIT] button is pressed, a measuring result will be recorded. The
data recorded can be viewed either on the display (an additional menu item "REAd-Lo66"
is displayed when accessing the configuration menu) or through the serial interface in a
EN
PC (GSoft).
Storable data sets: 99
A data set consists of (max.):
Sensor 1: Current measured value at that data point
■
Sensor 1: Min. peak, Max. peak since last data point
■
1)
Sensor 2 : current measured value at that data point
■
1)
Sensor 2 : Min. peak, Max. peak since last data point
■
Difference sensor 1 - sensor 2
■
Difference sensor 1 - sensor 2
■
Time and date stamp at that data point
■
1) Only valid for 2-channel version, CPH62I0-S2
With each recording, "St.XX" will be displayed briefly. XX represents the number of the
measuring result.
Delete stored data
1. Press the [STORE/QUIT] button for 2 seconds.
⇒
The main menu "CLr." is accessed.
2. With the [MIN] or [MAX] button, select the desired function.
The following functions can be selected:
Delete all data sets
Clear the last data set
3. With the [STORE/QUIT] button, confirm the selection.
4. Press the [SET/MENU] button.
⇒
Return to main menu.
32
1)
: Measured value at that data point
1)
: Min. peak, Max. peak since last data point
WIKA operating instructions, model CPH62I0
Do not delete (cancel the
process)