6. Commissioning, operation
The following functions can be selected:
Stop data logging
3. With the [STORE/QUIT] button, confirm the selection.
4. Press the [SET/MENU] button.
⇒
Return to main menu.
If, during a cyclic data logging, the measuring instrument is switched off, you
will automatically be asked whether the data logging should be stopped. The
instrument can only be switched off after the recording has been stopped.
The auto power-off function is deactivated during recording!
Clearing logger recording
1. Press the [STORE/QUIT] button for 2 seconds.
⇒
The display shows "Lo66 rvn":
2. With the [MIN] or [MAX] buttons, change over the display.
⇒
The display shows "Lo66 CLr":
3. Press [STORE/QUIT] button.
⇒
The option to clear the logger memory will be displayed:
4. With the [MIN] or [MAX] button, select the desired function.
WIKA operating instructions, model CPH62I0
Do not stop data logging
EN
35