2. Short overview
2. Short overview
2.1 Overview
EN
3
1 Sensor connection
Hand-held pressure indicator model CPH62I0-S1 or CPH62I0-S2 with leather case
2
(Ex protective cover)
3 Reference pressure sensor model CPT62I0
2.2 Description
The CPH62I0 hand-held pressure indicator can be used as a calibrator, and for any
application where an accurate pressure measurement is required, within hazardous
areas.
Model CPT62I0 reference pressure sensors with measuring ranges up to 1,000 bar
are available for the hand-held pressure indicator. This hand-held pressure indicator
automatically recognises the measuring range of the connected pressure sensor and
guarantees a high-accuracy pressure measurement.
In addition to pressure sensors for gauge and absolute pressure, differential pressure can
also be measured with the CPH62I0-S2 and two connected pressure sensors.
Selectable pressure units here are bar, mbar, psi, Pa, kPa, MPa, mmHg or inHg. An
integrated data logger and various other functions (such as Min, Max, Hold, Tare, zero
6
1
2
WIKA operating instructions, model CPH62I0