Digital Indicator Model Cph62I0 - WIKA CPH62I0 Betriebsanleitung

10. Specifications
Model CPH62I0 hand-held pressure indicator (complete measuring chain)
Accuracy of the
measuring chain
EN
Pressure types
Sensor compatibility

10.2 Digital indicator model CPH62I0

Digital indicator model CPH62I0
Display
Display
Indication range
Pressure units
Functions
Measuring rate
Memory
Functions via button press
Menu functions
Mean value filter
Data logger
Real-time clock
Voltage supply
Power supply
Battery life
Permissible ambient conditions
Operating temperature
Storage temperature
Relative humidity
44
0.2 % FS; {optional: 0.1 % FS} at reference conditions
1)
Gauge pressure, {Absolute pressure of 0 ... 25 bar abs. (0 ... 360 psi
abs.) and vacuum ranges of -1 ... +24 bar (-14.5 ... 550 psi)}
Differential pressure measurement only with CPH62I0-S2, and two
model CPT62I0 reference pressure sensors connected
Compatible with model CPT62I0 reference pressure sensors
Large 4 1/2-digit LC display for indication of two pressure values
and additional information
-19999 ... 19999 digits, depending on sensor used
bar, mbar, psi, Pa, kPa, MPa, mmHg and inHg (depending on the
measuring range, freely selectable)
4/s ("slow"); 1,000/s ("fast"); > 1,000/s unfiltered (peak value
detection), selectable
Min./Max., integrated data logger
Min./Max. memory, Hold, Tare, zero point correction, logger (start/
stop)
Min./Max. alarm (acoustic/visual), sea level (barometric air
pressure), power-off function, measuring rate, mean value filter
1 ... 120 seconds, adjustable
Individual value logger: Up to 99 recordings incl. time via button
press
Cyclic logger: Automatic recording of up to 10,000 values incl.
time
Cycle time: selectable from 1 ... 3,600 seconds
integrated clock with date
9 V battery
> 300 hours of operation (1 sensor with a measuring rate of 4/s)
-10 ... +50 °C (14 ... 122 °F)
-20 ... +70 °C (-4 ... +158 °F)
0 ... 95 % r. h. (non-condensing)
WIKA operating instructions, model CPH62I0
2)