Intended Use; Improper Use - WIKA CPH62I0 Betriebsanleitung

3. Safety

3.2 Intended use

The CPH62I0 hand-held pressure indicator can be used as a calibrator, and for any
application where an accurate pressure measurement is required, within hazardous
areas.
EN
To use the CPH62I0 in hazardous areas, it is imperative to insert the
hand-held pressure indicator into the leather case (Ex protective cover)
supplied. The press stud of the leather case (Ex protective cover) must be
closed.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications
requires the instrument to be taken out of service immediately and inspected by an
authorised WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Plugs and sockets must be
protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary to
the intended use.

3.3 Improper use

WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and injuries.
▶
▶
▶
▶
▶
Any use beyond or different to the intended use is considered as improper use.
8
Refrain from unauthorised modifications to the instrument.
Do not use the instrument with abrasive or viscous media.
Only use the serial and analogue interfaces outside the hazardous areas.
Only replace the batteries outside hazardous areas.
Within hazardous areas, the accompanying leather case must be used!
WIKA operating instructions, model CPH62I0