Trimming The Helicopter - Reely SKY 22 93 80 Bedienungsanleitung

g) Trimming the helicopter
Push the Pitch stick carefully forward and observe the response of your model. Shortly before the
helicopter starts hovering, you can already determine in which direction your model wants to move.
• If the helicopter wants to turn to the right with the tip of the fuselage, then reduce the speed and
push the steering trim for the Tail function (see figure 1, pos. 9) gradually to the left.
• Push the Pitch stick carefully forward and check if the adjustment was sufficient.
• Repeat the procedure until the model does not show any tendency to drift to the right.
• If the tip of the fuselage turns to the left, carry out a right trim adjustment.
Figure 8
58