10.
Replacing the Ship's Propeller
Proceed as follows to replace the ship's propeller:
• Remove the lock nut with a suitable tool (not included) (figure 7, item 1). To remove the nut, turn it counter-clockwise
to the left.
• Remove the ship's propeller (figure 7, item 2) from the drive shaft. For this, hold the rear nut at the stern tube (figure
7, item 3) with a suitable tool (not enclosed). Now turn the ship's propeller counter-clockwise until it can be removed.
• Install the new ship's propeller onto the drive shaft in the reverse sequence.
42
Figure 7