Mounting The Outdoor Sensor; Setting Up Or Mounting The Weather Station - Eurochron WS1173 Bedienungsanleitung

c) Mounting the Outdoor Sensor
The outdoor sensor can be attached to the wall on a nail, screw or hook using the opening on
the rear.
This opening can also be used to fix the sensor with the included cable tie.
When drilling and screwing, ensure that no cables or lines are damaged.
To be able to read the display integrated in the outdoor sensor, we recommend that
the outdoor sensor be installed to the left or right of a window.
Select the mounting site so that the outdoor sensor is not subject to direct solar ir-
radiation, because temperature measurement will otherwise be incorrect. The same
applies if rain or snow gets on the outdoor sensor.
d) Setting up or Mounting the Weather Station
• The weather station can be put on the wall using an opening in the rear and, e.g., a hook,
nail or screw.
• Alternatively, the weather station can be set up on a horizontal, stable, sufficiently large area
using the extensible standing base. Use a suitable pad on valuable furniture surfaces to
prevent scratches.
41