Automatic Switching In Case Of Several Temperature/Air Humidity Sensors; Selecting Or Turning The Temperature Alarm On/Off; Setting The Temperature Values For The Temperature Alarm; Trend Display For Temperature/Air Humidity - Conrad TE831X Bedienungsanleitung

 Automatic switching in case of several temperature/air humidity sensors
If you operate more than one temperature/air humidity sensor, the weather station can also change the up to 5
channels automatically.
• Keep the button "CHANNEL" (4) depressed until the symbol "

This is only possible if more than one temperature/air humidity sensor is registered with the weather
station.
• To deactivate the automatic switchover again, keep the button "CHANNEL" (4) depressed until the symbol "
disappears.
 Selecting or turning the temperature alarm on/off
For each of the 5 channels, you can select a top and bottom temperature. When this is exceeded or undercut, an
alarm sounds (stop this by pressing the button "SNOOZE • LIGHT").
• First select the desired channel for the corresponding temperature/air humidity sensor with the button "CHANNEL"
(4), for which you want to select resp. deactivate the temperature alarm.
• Briefly press the button "ALARM/CHART" (1) repeatedly to switch between the top temperature limit (symbol
" "), bottom temperature limit (symbol "
• If the symbol " " or "
briefly pressing the button " " (6) or " " (7).

When the temperature alarm is deactivated, the display shows "OFF"; when it is activated, the
respective value.
 Setting the temperature values for the temperature alarm
• First press the button "ALARM/CHART" (1) once or twice to display the top (symbol "
temperature alarm. Then briefly press the button " " (6) or " " (7) to activate the temperature alarm (a
temperature value is displayed instead of "OFF").
• Now keep the button "ALARM/CHART" (1) depressed until the temperature value changes.
• You can change the temperature value with the buttons " " (6) or " " (7) (keep the respective button depressed
longer for quick adjustment).
• Save the setting by briefly pressing the button "ALARM/CHART" (1).
 Trend display for temperature/air humidity
As with the air pressure, the indoor/outdoor temperature and the indoor/outdoor humidity also features a trend display
to show you the respective development of the measuring values:
Rising
") and the normal display.
" is displayed, you can activate or deactivate the corresponding temperature alarm by
Constant
" appears.
") or bottom (symbol "
Falling
"
")
73