Conrad KW 9110 Bedienungsanleitung Seite 52

If after 5-10 minutes no current time/date is indicated in the display, modify the installation
location of the weather station.
Start a signal search manually by pressing the " " button (2) on the front side of the weather
station for 3 seconds.
Then the radio antenna symbol (I) flashes on the right next to the time display (G), the weather
station now searches for a DCF signal (if necessary press the " " button (2) for another 3
seconds).

As an alternative, you can set the time/date manually or simply leave the weather
station overnight so that it can carry out the daily DCF signal search.
52