Setting The Time Zone - Conrad KW 9110 Bedienungsanleitung

Adjust the language with the " " (1) or " " (2) buttons.
GE = German
EN = English
RU = Russian
DA = Danish
NE = Dutch
IT = Italian
SP = Spanish
FR = French
• Briefly press the "MODE/SET" button (4), the settings mode is ended.

If the time and/or the date is set, the weather station deactivates the DCF reception
automatically, the radio tower symbol disappears.
If the DCF reception is to be re-activated, then proceed as described in chapter 12.
I) (hold down the " " button (2) for three seconds)
n) Setting the time zone
Despite the DCF time, the time zone must be set if required, as the weather station obviously
cannot determine where it is.
Proceed as described in chapter 12. m) to make the setting. Do not however adjust the time
and the date and the DCF reception will be switched off.
• Press and hold the "MODE/SET" button (4) for 3 seconds until the hours in the display start
flashing.
• Now repeatedly press the "MODE/SET" button (4) until the time zone flashes ("TZ"="Time
zone"). Adjust the time zone with the " " (1) or " " (2) buttons.
• Wait a few seconds until the setting mode is automatically exited.

If the time and/or the date is adjusted, the weather station deactivates the DCF
reception automatically, the radio tower symbol disappears.
If the DCF reception is to be re-activated, then proceed as described in chapter 12.
I) (hold down the " " button (2) for three seconds)
60