Controls; A) Weather Station - Conrad KW 9110 Bedienungsanleitung

8. Controls


You can find the figures on the fold-out page of these operating instructions.

a) Weather station

1 The "12/24 " button for switching the time between 12 and 24h mode and to increase a
value, e.g. when setting the alarm time.
2 The "ALARM ON/OFF / OUT °C/°F /
off and for switching between outdoor sensor temperature units (°C/°F) and for switching
on/off the DCF reception and for reducing a value, e.g. when setting the alarm time.
3 "SNOOZE / LIGHT" button to activate snooze mode (during alarm signal) or for display
illumination.
4 "MODE /SET" button for switching between the time and the alarm display as well as for
starting to set the time and the alarm time.
5 "RESET" button (inset into the housing) for resetting the weather station to the factory
settings (alternatively you can just remove the batteries for a few seconds).
6 "HISTORY" to show the barometric pressure history for the last 12 hours.
7 "+" button to increase a setting value
8 "- / IN °C/°F" button to reduce a setting value and to switch between the weather station's
temperature units (°C or °F).
9 Opening for wall-mounting.
10 "CHANNEL" button for changing between up to 3 outdoor sensors.
11 "ALERT" button for switching on/off and setting the temperature alarm.
12 "IN MAX/MIN" button for displaying the maximum and minimum values for the indoor
humidity and the indoor temperature and to delete the saved values.
13 "OUT MAX/MIN" button for displaying the maximum and minimum values for the outdoor
humidity and the outdoor temperature and to delete the saved values.
14 Fold-out stand
15 Battery compartment for 3*AA/mignon batteries
16 External power supply socket (supply not included in the delivery)
46
" button for switching the alarm function on and