M) Setting Display Unit For Temperature (°C/°F); N) Switching Between 12/24 Display - Conrad WS 624 Bedienungsanleitung

m) Setting display unit for temperature (°C/°F)
• If a time zone is shown ("ZONE" display above time), change to the normal time display (eg.
12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language appears
on the top right on the display instead of the running second. Depress the button.
• By pressing the "MODE" button again briefly, the temperature display starts to flash now.
• You can choose the desired temperature unit (°C or °F) with the " " and " " button on the
front of the base station.
• Now press the "MODE" button until the normal time display reappears (and no setting option
flashes anymore).

n) Switching between 12/24 display

The time display can be switched between the 24 hour format and the 12 hour format with AM/
PM display.
• If a time zone is shown ("ZONE" display above time), change to the normal time display (eg.
12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language appears
on the top right on the display instead of the running second. Depress the button.
• Briefly press the "MODE" button several times until "24Hr" (or "12Hr") starts to flash on the
top right of the display.
• You can choose the desired display format with the " " and " " button on the front of the
base station.
• Now press the "MODE" button (only press button briefly each time) until the normal time
display reappears (and no setting option flashes anymore).
74