L) Setting Language For Weekdays; M) Setting Display Unit For Temperature (°C/°F) - Conrad 64 61 09 Bedienungsanleitung

l) Setting language for the weekday
The DCF clock does not only display the radio accurate time and date (in the case of activated and
faultless radio reception) but also the weekday. However, the abbreviation for the weekday varies in
many countries, eg "So" for Sunday in Germany and "Su" for Sunday in England.
This is why you can set the language. For this purpose, proceed as follows:
• If a time zone is shown ("ZONE" bottom left, next to time), change to the normal time display (eg.
12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language appears on
the bottom right on the display.
• You can choose the desired language with the "+" and "-" button on the right hand side of the base
station.
DE = German
FR = French
IT = Italian
SP = Spanish
EN = English
• Now press the "MODE" button until the normal time display reappears (and no setting option
flashes anymore).
m) Setting display unit for temperature (°C/°F)
• If a time zone is shown ("ZONE" bottom left next to time), change to the normal time display (eg.
12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language appears on
the bottom right on the display.
• By pressing the "MODE" button briefly, the temperature display starts to flash
• You can choose the desired temperature unit with the "+" and "-" button on the right hand side of
the base station.
• Now press the "MODE" button until the normal time display reappears (and no setting option
flashes anymore).
71