Selecting The Unit For The Temperature Indication; Selecting The Unit For The Wind Speed; Exiting The Configuration Mode - Conrad WS222 Bedienungsanleitung

-
+
temperature
NEXT
-
+
NEXT
EXIT
62
The following units can be selected:
°C
°F
Here, the indication is presented with the analogue tempera-
ture indication, in the normal operating mode in all temperature
unit
display fields.
for
Select the unit desired for indicating the temperature via the +
indication
and - keys.
Press the NEXT key. Now, the unit of the wind speed can be
selected.
The following units can be selected:
km/h
m/s
mph
The indication is given in the WIND field.
Select the unit desired for indicating the wind speed via the +
unit
and - keys.
for
wind speed
Press the EXIT key to close the entry. This can be done at any
position, e.g. after entering the time.
The data already entered will be saved automatically.
Selecting the unit for the temperature
indication
= grade Centigrade (basic setting)
= grade Fahrenheit

Selecting the unit for the wind speed

= kilometres per hour
= meters per second
= miles per hour
If you press the NEXT key, the year will appear
again and the order of entries will start from the
beginning. Now, you could either check or change
the entries.

Exiting the configuration mode