Setting Of Contrast For The Lc Display; Setting Of Time Zone; Switching Dcf Reception On/Off - Conrad WS-9720-IT Bedienungsanleitung

1. Adjusting contrast for the LC display
The contrast for the LC display of the weather station can be set in 8 steps (default setting
"LCD 4").
Press the "SET" button, the display shows "LCD 4" , number "4" flashes.
With the "+" button the contrast can now be set the way you wish.
To confirm, briefly press the "SET" button, you will get to setting the time zone. With the "CH"
button the setting mode is exited.

2. Setting of time zone

The time zone default setting of the weather station is "0h". Once the setting for the contrast
of the LC display was exited with the "SET" button, "ZONE" will appear on the top on the display
and the hours for the time zone setting will flash.
The hours for the time zone setting can be changed with the "+" button.
To confirm, briefly press the "SET" button, you will get to the manual setting of the time. With
the "CH" button the setting mode is exited.
3. Switching the DCF reception on/off
In places where the reception of the DCF77 signal is not possible, the DCF time reception
function can be turned off. The clock will then work like a normal quartz clock.
"RC ON" will appear on the display, the display "ON" and the DCF radio reception symbol start
to flash.
With the "+" button it can be switched between "ON" and "OFF":
ON DCF radio reception on (basic setting)
OFF DCF radio reception off

If the time reception function was turned off manually ("OFF"), then there is no
search for the DCF time signal until the reception function is activated again
("ON").
When the mode is "OFF" the DCF radio reception symbol is not shown on the
LC display.
To confirm, briefly press the "SET" button, you will get to setting the 12/24 h display format. With
the "CH" button the setting mode is exited.
58