USE AND OPERATION
4.2.2
Off-Line Configuration
An alternative method of configuring the terminals is by reading barcodes in the
"Menu & Command Booklet" or in the "STANDARD MODE & ENHANCED MODE"
manual of the specific terminal.
The following example provides configuration for a F734 terminal if you are using
SysTools™2001. You should read the following barcodes in sequence. Only the
STATION ADDRESS, BAUD RATE, PARITY and DATA BITS parameters can be
changed.
EXAMPLE
RETURN TO
DEFAULT
PARAMETER
SET-UP IN/OUT
STATION ADDRESS
0
1
START OF BLOCK
4
45