Datalogic F732 WIZARD Bedienungsanleitung Seite 141

EASYGEN™
A
Input Barcode & Store it in "Code" Field stands by for the scanning of a
barcode whose specifications are indicated between configurable parameters.
After the scan, the data is saved in TABLE1 in the Code field.
Beep for OK code emits an acoustic signal to confirm the code scanning.
Input Quantity & Store it in "Quantity" Field stands by for the quantity
reading (numeric value).
After the scan, the data is saved in TABLE1 in the Quantity field.
Note that among the settings under LIMITS the SIZE value is set to 5 or the
maximum number of acceptable characters defined in the Quantity field
description in TABLE1. If this value is left at 0 (default) during input, more than 5
characters will be accepted but the data will not be recorded and the Error
variable will assume the value of 31 to indicate this.
Beep for Quantity OK emits an acoustic signal to confirm the quantity inserted.
Read & Store Date saves the date in the Date field, acquiring it in real time
from the Hardware clock.
Read & Store Time saves the date in the Time field, acquiring it in real time
from the Hardware clock.
Point to next record & Restart allows the program to restart and so request a
barcode and a quantity once more.
80